Датчики положения, давления/вакуума, расхода

Датчик положения SMTO-8E-NS-S-LED-24..

Бесконтактный датчик, NPN, 24VDC, разъем, без крепежа

Проект	для Т-образной щели
Наличие сертификатов	C-Tick
Обозначение CE (см. заявление о соответствии)	в соответствии с директивой EU по электромагнитной совместимости EMC
Замечания по материалу	Не содержит медь и тефлон Соответствует директиве по ограничению использования опасных веществ (RoHS)
Принцип измерения	магниторезистивный
Температура окружающей среды	-20 ... 60 °C
Выход переключателя	NPN
Функция переключающего элемента	Нормально разомкнутый контакт
Повторяемость порога переключения	+/- 0,1 mm
Время включения	<= 0,5 ms
Время выключения	10 ... 25 ms
Макс. выходной ток	100 mA
Макс. характеристика контакта DC	3 W
Падение напряжения	<= 1,8 V
Остаточный ток	<= 0,01 mA
Защита от короткого замыкания	Пульсирующий
Способность выдерживать перегрузку	Имеется в наличии
Диапазон рабочего напряжения DC	10 ... 30 V
Защищен от смены полярности	для всех электрических соединений
Электрическое подключение	Разъем M8x1 3-пин
Направление выхода	Поперечный
Макс. момент затяжки разъема	0,3 Nm
Тип крепления	Фиксатор для Т-образной щели При помощи принадлежностей Вставляется в паз сверху
Момент затяжки	1 Nm
Вес продукта	10 g
Материал корпуса	Латунь TPE-U(PU) Никелирование
Рабочий режим дисплея	Желтый светодиод
Класс защиты	IP65 IP67

Производитель: Festo

Подробнее

Купить

Датчик положения SMTO-8E-PS-M12-LED-24..

Бесконтактный датчик, PNP, 24VDC, кабель 2,5 м, разъем М12, без крепежа

Проект	для Т-образной щели
Наличие сертификатов	C-Tick
Обозначение CE (см. заявление о соответствии)	в соответствии с директивой EU по электромагнитной совместимости EMC
Замечания по материалу	Не содержит медь и тефлон Соответствует директиве по ограничению использования опасных веществ (RoHS)
Принцип измерения	магниторезистивный
Температура окружающей среды	-20 ... 60 °C
Выход переключателя	PNP
Функция переключающего элемента	Нормально разомкнутый контакт
Повторяемость порога переключения	+/- 0,1 mm
Время включения	<= 0,5 ms
Время выключения	10 ... 25 ms
Макс. выходной ток	100 mA
Макс. характеристика контакта DC	3 W
Падение напряжения	<= 1,8 V
Остаточный ток	<= 0,01 mA
Защита от короткого замыкания	Пульсирующий
Способность выдерживать перегрузку	Имеется в наличии
Диапазон рабочего напряжения DC	10 ... 30 V
Защищен от смены полярности	для всех электрических соединений
Электрическое подключение	Разъем M12x1 3-пин
Направление выхода	Поперечный
Макс. момент затяжки разъема	0,5 Nm
Тип крепления	Фиксатор для Т-образной щели При помощи принадлежностей Вставляется в паз сверху
Момент затяжки	0,5 Nm
Вес продукта	10 g
Материал корпуса	Алюминиевый сплав TPE-U(PU) Легированная сталь, нержавеющая
Рабочий режим дисплея	Желтый светодиод
Класс защиты	IP65 IP67

Производитель: Festo

Подробнее

Купить

Датчик положения SMTO-8E-PS-S-LED-24..

Бесконтактный датчик, PNP, 24VDC, разъем, без крепежа

Проект	для Т-образной щели
Наличие сертификатов	C-Tick
Обозначение CE (см. заявление о соответствии)	в соответствии с директивой EU по электромагнитной совместимости EMC
Замечания по материалу	Не содержит медь и тефлон Соответствует директиве по ограничению использования опасных веществ (RoHS)
Принцип измерения	магниторезистивный
Температура окружающей среды	-20 ... 60 °C
Выход переключателя	PNP
Функция переключающего элемента	Нормально разомкнутый контакт
Повторяемость порога переключения	+/- 0,1 mm
Время включения	<= 0,5 ms
Время выключения	10 ... 25 ms
Макс. выходной ток	100 mA
Макс. характеристика контакта DC	3 W
Падение напряжения	<= 1,8 V
Остаточный ток	<= 0,01 mA
Защита от короткого замыкания	Пульсирующий
Способность выдерживать перегрузку	Имеется в наличии
Диапазон рабочего напряжения DC	10 ... 30 V
Защищен от смены полярности	для всех электрических соединений
Электрическое подключение	Разъем M8x1 3-пин
Направление выхода	Поперечный
Макс. момент затяжки разъема	0,3 Nm
Тип крепления	Фиксатор для Т-образной щели При помощи принадлежностей Вставляется в паз сверху
Момент затяжки	1 Nm
Вес продукта	10 g
Материал корпуса	Латунь TPE-U(PU) Никелирование
Рабочий режим дисплея	Желтый светодиод
Класс защиты	IP65

Производитель: Festo

Подробнее

Купить

Датчик положения SMTSO-1-PS-S-LED-24..

Бесконтактный датчик, PNP, 24VDC, разъем, без крепежа, для сварки

Проект	Блочного проекта
Наличие сертификатов	C-Tick
Обозначение CE (см. заявление о соответствии)	в соответствии с директивой EU по электромагнитной совместимости EMC
Замечания по материалу	Не содержит медь и тефлон
Принцип измерения	Магнитный, индуктивный
Температура окружающей среды	-25 ... 70 °C
Выход переключателя	PNP
Функция переключающего элемента	Нормально разомкнутый контакт
Повторяемость порога переключения	+/- 0,1 mm
Время включения	35 ms
Время выключения	20 ms
Макс. выходной ток	200 mA
Макс. характеристика контакта DC	6 W
Падение напряжения	3 V
Остаточный ток	0,01 mA
Защита от короткого замыкания	Пульсирующий
Способность выдерживать перегрузку	Имеется в наличии
Диапазон рабочего напряжения DC	10 ... 30 V
Защищен от смены полярности	для всех электрических соединений
Электрическое подключение	Разъем M12x1 3-пин
Направление выхода	аксиальный
Макс. момент затяжки разъема	0,3 Nm
Тип крепления	При помощи принадлежностей
Момент затяжки	< 0,3 Nm
Вес продукта	70 g
Материал корпуса	PA PUR Цинковая штамповка
Режим готовности дисплея	Зеленый светодиод
Рабочий режим дисплея	Желтый светодиод
Класс защиты	IP67
Стойкость к магнитным полям	Магнитные поля переменного тока 50 - 60 Hz

Производитель: Festo

Подробнее

Купить

Датчик положения SMTSO-8E-NS-M12-LED-24..

Бесконтактный датчик, NPN, 24VDC, разъем M12, без крепежа, для сварки

Проект	для Т-образной щели
Наличие сертификатов	C-Tick
Обозначение CE (см. заявление о соответствии)	в соответствии с директивой EU по электромагнитной совместимости EMC
Замечания по материалу	Не содержит медь и тефлон
Принцип измерения	Магнитный, индуктивный
Температура окружающей среды	-25 ... 70 °C
Выход переключателя	NPN
Функция переключающего элемента	Нормально разомкнутый контакт
Повторяемость порога переключения	+/- 0,1 mm
Время включения	<= 38 ms
Время выключения	<= 20 ms
Макс. выходной ток	200 mA
Макс. характеристика контакта DC	6 W
Падение напряжения	<= 3 V
Остаточный ток	<= 0,01 mA
Защита от короткого замыкания	Пульсирующий
Способность выдерживать перегрузку	Имеется в наличии
Диапазон рабочего напряжения DC	10 ... 30 V
Защищен от смены полярности	для всех электрических соединений
Электрическое подключение	Разъем M12x1 3-пин
Направление выхода	Поперечный
Тип крепления	Фиксатор для Т-образной щели При помощи принадлежностей Вставляется в паз сверху
Макс. момент затяжки	0,5 Nm
Вес продукта	10 g
Материал корпуса	Алюминиевый сплав PA PUR Легированная сталь, нержавеющая
Рабочий режим дисплея	Желтый светодиод
Класс защиты	IP65 IP67
Стойкость к магнитным полям	Магнитные поля переменного тока 45 - 65 Hz

Производитель: Festo

Подробнее

Купить

Датчик положения SMTSO-8E-PS-M12-LED-24..

Бесконтактный датчик,PNP, 24VDC, разъем M12, без крепежа, для сварки

Проект	для Т-образной щели
Наличие сертификатов	C-Tick
Обозначение CE (см. заявление о соответствии)	в соответствии с директивой EU по электромагнитной совместимости EMC
Замечания по материалу	Не содержит медь и тефлон
Принцип измерения	Магнитный, индуктивный
Температура окружающей среды	-25 ... 70 °C
Выход переключателя	PNP
Функция переключающего элемента	Нормально разомкнутый контакт
Повторяемость порога переключения	+/- 0,1 mm
Время включения	38 ms
Время выключения	20 ms
Макс. выходной ток	200 mA
Макс. характеристика контакта DC	6 W
Падение напряжения	<= 1,8 V
Остаточный ток	<= 0,01 mA
Защита от короткого замыкания	Да
Способность выдерживать перегрузку	Имеется в наличии
Диапазон рабочего напряжения DC	10 ... 30 V
Защищен от смены полярности	для всех электрических соединений
Электрическое подключение	Разъем M12x1 3-пин
Направление выхода	Поперечный
Макс. момент затяжки разъема	0,5 Nm
Тип крепления	При помощи принадлежностей
Вес продукта	19 g
Материал корпуса	Алюминиевый сплав PA TPE-U(PU) Легированная сталь, нержавеющая
Рабочий режим дисплея	Желтый светодиод
Класс защиты	IP65 IP67
Стойкость к магнитным полям	Магнитные поля переменного тока 45 - 65 Hz

Производитель: Festo

Подробнее

Купить

Датчик приближения CRSMEO-4-K-LED-24..

Датчик положения Festo, коррозионностойкий, с кабелем, без крепежного набора CRSMB/CRSMBR.

Проект	Круглый
Авторизация	RCM Mark
Обозначение CE (см. заявление о соответствии)	в соответствии с директивой EU по электромагнитной совместимости EMC
Замечания по материалу	Не содержит медь и тефлон
Принцип измерения	Магнитный, геркон
Температура окружающей среды	-20 ... 60 °C
Выход переключателя	с контактом, биполярный
Функция переключающего элемента	Нормально разомкнутый контакт
Повторяемость порога переключения	+/- 0,1 mm
Время включения	<= 0,5 ms
Время выключения	0,03 ms
Макс. выходной ток	500 mA
Макс. характеристика контакта DC	10 W
Защита от короткого замыкания	Нет
Диапазон рабочего напряжения DC	12 ... 30 V
Защищен от смены полярности	Нет
Электрическое подключение	Кабель 3-жильный
Длина кабеля	2,5 m
Информация о материале, оплетка кабеля	TPE-O
Тип крепления	с принадлежностями
Вес продукта	70 g
Информация о материале, корпус	PP
Рабочий режим дисплея	Жёлтый светодиод
Температура окружающей среды	-5 ... 60 °C
Класс защиты	IP67

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-1000U-HQ10-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	1000 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	1000 l/min
Flow measurement range initial value	10 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-1000U-HQ10-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	1000 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	1000 l/min
Flow measurement range initial value	10 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-1000U-HQ12-2SA-M12-EX2..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-12
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	1000 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	1000 l/min
Flow measurement range initial value	10 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-1000U-WQ10-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	1000 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	1000 l/min
Flow measurement range initial value	10 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-1000U-WQ10-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	1000 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	1000 l/min
Flow measurement range initial value	10 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-10U-HQ6-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-6
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	10 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	10 l/min
Flow measurement range initial value	0.1 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 3:4:1 to DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-10U-HQ6-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-6
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	10 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	10 l/min
Flow measurement range initial value	0.1 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 3:4:1 to DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-10U-WQ6-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-6
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	10 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	10 l/min
Flow measurement range initial value	0.1 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 3:4:1 to DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-10U-WQ6-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-6
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	10 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	10 l/min
Flow measurement range initial value	0.1 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 3:4:1 to DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-200U-HQ10-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	200 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	200 l/min
Flow measurement range initial value	2 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-200U-HQ10-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	200 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	200 l/min
Flow measurement range initial value	2 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-200U-HQ8-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-8
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	200 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	200 l/min
Flow measurement range initial value	2 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-200U-HQ8-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-8
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	200 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	200 l/min
Flow measurement range initial value	2 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-200U-WQ10-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	200 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	200 l/min
Flow measurement range initial value	2 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-200U-WQ10-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	200 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	200 l/min
Flow measurement range initial value	2 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-200U-WQ8-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-8
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	200 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	200 l/min
Flow measurement range initial value	2 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-200U-WQ8-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-8
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	200 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	200 l/min
Flow measurement range initial value	2 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-50U-HQ6-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-6
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	50 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	50 l/min
Flow measurement range initial value	0.5 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 3:4:1 to DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-50U-HQ6-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-6
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	50 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	50 l/min
Flow measurement range initial value	0.5 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 3:4:1 to DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-50U-WQ6-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-6
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	50 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	50 l/min
Flow measurement range initial value	0.5 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 3:4:1 to DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-50U-WQ6-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-6
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	50 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	50 l/min
Flow measurement range initial value	0.5 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 3:4:1 to DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-600U-HQ10-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	600 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	600 l/min
Flow measurement range initial value	6 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-600U-HQ10-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	600 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	600 l/min
Flow measurement range initial value	6 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-600U-WQ10-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	600 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	600 l/min
Flow measurement range initial value	6 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfmф

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAB-600U-WQ10-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	600 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	600 l/min
Flow measurement range initial value	6 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAM-62-1000L-M-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAM
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	on service unit
Pneumatic connection	Manifold module
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Horizontal
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	1000 l/min
Characteristic curve for flow rate initial value	0 l/min
Corrosion resistance classification CRC	2
Direction of flow	From left to right
Direction of flow	Unidirectional
Flow measurement range final value	1000 l/min
Flow measurement range initial value	10 l/min
Materials information, housing	Aluminium die cast
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 16 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure dependency margin in ± %FS/bar	0.5 %FS/b.
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2x PNP or 2x NPN, adjustable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Window comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/K	typ. 0.1%FS/K
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAM-62-1000L-M-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAM
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	on service unit
Pneumatic connection	Manifold module
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Horizontal
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	1000 l/min
Characteristic curve for flow rate initial value	0 l/min
Corrosion resistance classification CRC	2
Direction of flow	From left to right
Direction of flow	Unidirectional
Flow measurement range final value	1000 l/min
Flow measurement range initial value	10 l/min
Materials information, housing	Aluminium die cast
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 16 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure dependency margin in ± %FS/bar	0.5 %FS/b.
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2x PNP or 2x NPN, adjustable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Window comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/K	typ. 0.1%FS/K
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAM-62-1000L-TG12-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAM
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	on service unit
Pneumatic connection	G1/2
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Horizontal
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	1000 l/min
Characteristic curve for flow rate initial value	0 l/min
Corrosion resistance classification CRC	2
Direction of flow	From left to right
Direction of flow	Unidirectional
Flow measurement range final value	1000 l/min
Flow measurement range initial value	10 l/min
Materials information, housing	Aluminium die cast
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 16 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure dependency margin in ± %FS/bar	0.5 %FS/b.
Pressure drop	< 100 mbar
Product weight	1100 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2x PNP or 2x NPN, adjustable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Window comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/K	typ. 0.1%FS/K
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAM-62-1000L-TG12-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAM
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Line installation
Pneumatic connection	G1/2
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Horizontal
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	1000 l/min
Characteristic curve for flow rate initial value	0 l/min
Corrosion resistance classification CRC	2
Direction of flow	From left to right
Direction of flow	Unidirectional
Flow measurement range final value	1000 l/min
Flow measurement range initial value	10 l/min
Materials information, housing	Aluminium die cast
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 16 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure dependency margin in ± %FS/bar	0.5 %FS/b.
Pressure drop	< 100 mbar
Product weight	1100 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2x PNP or 2x NPN, adjustable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Window comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/K	typ. 0.1%FS/K
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAM-62-3000L-M-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAM
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	on service unit
Pneumatic connection	Manifold module
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Horizontal
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	3000 l/min
Characteristic curve for flow rate initial value	0 l/min
Corrosion resistance classification CRC	2
Direction of flow	From left to right
Direction of flow	Unidirectional
Flow measurement range final value	3000 l/min
Flow measurement range initial value	30 l/min
Materials information, housing	Aluminium die cast
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 16 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure dependency margin in ± %FS/bar	0.5 %FS/b.
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2x PNP or 2x NPN, adjustable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Window comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/K	typ. 0.1%FS/K
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAM-62-3000L-TG12-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAM
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Line installation
Pneumatic connection	G1/2
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Horizontal
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	3000 l/min
Characteristic curve for flow rate initial value	0 l/min
Corrosion resistance classification CRC	2
Direction of flow	From left to right
Direction of flow	Unidirectional
Flow measurement range final value	3000 l/min
Flow measurement range initial value	30 l/min
Materials information, housing	Aluminium die cast
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 16 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure dependency margin in ± %FS/bar	0.5 %FS/b.
Pressure drop	< 100 mbar
Product weight	1100 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2x PNP or 2x NPN, adjustable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Window comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/K	typ. 0.1%FS/K
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAM-62-3000L-TG12-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAM
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Line installation
Pneumatic connection	G1/2
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Horizontal
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	5000 l/min
Characteristic curve for flow rate initial value	0 l/min
Corrosion resistance classification CRC	2
Direction of flow	From left to right
Direction of flow	Unidirectional
Flow measurement range final value	3000 l/min
Flow measurement range initial value	30 l/min
Materials information, housing	Aluminium die cast
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 16 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure dependency margin in ± %FS/bar	0.5 %FS/b.
Pressure drop	< 100 mbar
Product weight	1100 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2x PNP or 2x NPN, adjustable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Window comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/K	typ. 0.1%FS/K
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAM-62-5000L-M-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAM
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	on service unit
Pneumatic connection	Manifold module
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Horizontal
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	5000 l/min
Characteristic curve for flow rate initial value	0 l/min
Corrosion resistance classification CRC	2
Direction of flow	From left to right
Direction of flow	Unidirectional
Flow measurement range final value	5000 l/min
Flow measurement range initial value	50 l/min
Materials information, housing	Aluminium die cast
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 16 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure dependency margin in ± %FS/bar	0.5 %FS/b.
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2x PNP or 2x NPN, adjustable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Window comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/K	typ. 0.1%FS/K
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAM-62-5000L-M-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAM
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	on service unit
Pneumatic connection	Manifold module
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Horizontal
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	5000 l/min
Characteristic curve for flow rate initial value	0 l/min
Corrosion resistance classification CRC	2
Direction of flow	From left to right
Direction of flow	Unidirectional
Flow measurement range final value	5000 l/min
Flow measurement range initial value	50 l/min
Materials information, housing	Aluminium die cast
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 16 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure dependency margin in ± %FS/bar	0.5 %FS/b.
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2x PNP or 2x NPN, adjustable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Window comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/K	typ. 0.1%FS/K
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAM-62-5000L-TG12-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAM
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Line installation
Pneumatic connection	G1/2
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Horizontal
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	5000 l/min
Characteristic curve for flow rate initial value	0 l/min
Corrosion resistance classification CRC	2
Direction of flow	From left to right
Direction of flow	Unidirectional
Flow measurement range final value	5000 l/min
Flow measurement range initial value	50 l/min
Materials information, housing	Aluminium die cast
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 16 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure dependency margin in ± %FS/bar	0.5 %FS/b.
Pressure drop	< 100 mbar
Product weight	1100 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2x PNP or 2x NPN, adjustable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Window comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/K	typ. 0.1%FS/K
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Купить

Датчик расхода SFAM-62-5000L-TG12-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAM
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Line installation
Pneumatic connection	G1/2
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Horizontal
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	5000 l/min
Characteristic curve for flow rate initial value	0 l/min
Corrosion resistance classification CRC	2
Direction of flow	From left to right
Direction of flow	Unidirectional
Flow measurement range final value	5000 l/min
Flow measurement range initial value	50 l/min
Materials information, housing	Aluminium die cast
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 16 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure dependency margin in ± %FS/bar	0.5 %FS/b.
Pressure drop	< 100 mbar
Product weight	1100 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2x PNP or 2x NPN, adjustable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Window comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/K	typ. 0.1%FS/K
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm