Датчики положения, давления/вакуума, расхода

Датчик расхода SFAB-1000U-WQ10-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	1000 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	1000 l/min
Flow measurement range initial value	10 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчик расхода SFAB-1000U-WQ10-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	1000 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	1000 l/min
Flow measurement range initial value	10 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчик расхода SFAB-10U-HQ6-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-6
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	10 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	10 l/min
Flow measurement range initial value	0.1 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 3:4:1 to DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчик расхода SFAB-10U-HQ6-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-6
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	10 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	10 l/min
Flow measurement range initial value	0.1 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 3:4:1 to DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчик расхода SFAB-10U-WQ6-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-6
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	10 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	10 l/min
Flow measurement range initial value	0.1 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 3:4:1 to DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчик расхода SFAB-10U-WQ6-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-6
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	10 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	10 l/min
Flow measurement range initial value	0.1 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 3:4:1 to DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчик расхода SFAB-200U-HQ10-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	200 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	200 l/min
Flow measurement range initial value	2 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчик расхода SFAB-200U-HQ10-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	200 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	200 l/min
Flow measurement range initial value	2 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчик расхода SFAB-200U-HQ8-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-8
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	200 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	200 l/min
Flow measurement range initial value	2 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчик расхода SFAB-200U-HQ8-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-8
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	200 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	200 l/min
Flow measurement range initial value	2 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчик расхода SFAB-200U-WQ10-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	200 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	200 l/min
Flow measurement range initial value	2 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчик расхода SFAB-200U-WQ10-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	200 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	200 l/min
Flow measurement range initial value	2 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчик расхода SFAB-200U-WQ8-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-8
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	200 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	200 l/min
Flow measurement range initial value	2 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчик расхода SFAB-200U-WQ8-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-8
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	200 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	200 l/min
Flow measurement range initial value	2 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчик расхода SFAB-50U-HQ6-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-6
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	50 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	50 l/min
Flow measurement range initial value	0.5 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 3:4:1 to DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчик расхода SFAB-50U-HQ6-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-6
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	50 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	50 l/min
Flow measurement range initial value	0.5 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 3:4:1 to DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчик расхода SFAB-50U-WQ6-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-6
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	50 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	50 l/min
Flow measurement range initial value	0.5 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 3:4:1 to DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчик расхода SFAB-50U-WQ6-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-6
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	50 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	50 l/min
Flow measurement range initial value	0.5 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 3:4:1 to DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/h
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчик расхода SFAB-600U-HQ10-2SA-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	4 - 20 mA
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	600 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	600 l/min
Flow measurement range initial value	6 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. load resistance, current output	500 Ohm
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	20 mA
Output characteristic curve initial value	4 mA
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчик расхода SFAB-600U-HQ10-2SV-M12..

Датчик расхода

Property	No
Product Type	Festo Flow sensors
Short type code	SFAB
Electrical Connect	5-pin
Electrical Connect	M12 x 1
Electrical Connect	Plug straight
Mounting	Optional
Mounting	With through hole
Mounting	With top-hat rail
Mounting	With wall/surface fixing
Pneumatic connection	QS-10
Ambient temp	0 - 50 °C
Analogue output	0 - 10 V
Assembly position	Any
ATEX category Dust	II 3D
ATEX category Gas	II 3G
Authorisation	c UL us - Recognized (OL)
Authorisation	C-Tick
CE mark (see declaration of conformity)	to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)	to EU directive for EMC
Characteristic curve for flow rate final value	600 l/min
Characteristic curve for flow rate initial value	0 l/min
Connector pin assignments per standard	EN 60947-5-2
Corrosion resistance classification CRC	2
Direction of flow	P1 -> P2
Direction of flow	Unidirectional
Explosion ignition protection type Dust	Ex tD A22 IP54 T80°C
Explosion ignition protection type Gas	Ex nA II T5 X
Explosion protection	Zone 2 (ATEX)
Explosion protection	Zone 22 (ATEX)
Explosion-proof ambient temperature	0°C <= Ta <= +50°C
Flow measurement range final value	600 l/min
Flow measurement range initial value	6 l/min
Materials information, housing	PA-reinforced
Materials note	Conforms to RoHS
Max. output current	<= 100 mA
Measured variable	Consumption
Measured variable	Flow rate
Measuring principle	Thermal
Medium temperature	0 - 50 °C
Min. load resistance, voltage output	10 kOhm
Nominal temperature	23 °C
Operating medium	Air quality class 5:4:3 as per DIN ISO 8573-1
Operating medium	Nitrogen
Operating Pressure	0 - 10 bar
Operating voltage range DC	15 - 30 V
Output characteristic curve final value	10 V
Output characteristic curve initial value	0 V
Polarity protected	for all electrical connections
Precision margin in ± %FS	3 %FS
Precision zero point in ± %FS	0.3 %FS
Pressure drop	< 100 mbar
Product weight	600 g
Protection class	IP65
Repetition accuracy margin in ± %FS	0.8 %FS
Repetition accuracy zero point in ± %FS	0.2 %FS
Short circuit strength	Yes
Switch output	2 x PNP or 2 x NPN switchable
Switching element function	Normally closed contact
Switching element function	Normally open contact
Switching function	Threshold value comparator
Switching function	Window comparator
Type of display	Illuminated LCD blue
Unit(s) that can be displayed	l
Unit(s) that can be displayed	l/min
Unit(s) that can be displayed	m3
Unit(s) that can be displayed	scf
Unit(s) that can be displayed	scfm

Производитель: Festo

Подробнее

Датчики положения, давления/вакуума, расхода