Обратный звонок
+38 (097) 899-91-21
a.mirzaiev@gmail.com
Поиск

Поиск по запросу:

Показывать:
50

Датчик положения SMTO-4U-PS-K-LED-24..

Бесконтактный датчик, PNP, 24VDC, кабель 2,5 м, без крепежа

Проект  Круглый 
Наличие сертификатов  C-Tick 
Обозначение CE (см. заявление о соответствии)  в соответствии с директивой EU по электромагнитной совместимости EMC 
Замечания по материалу  Не содержит медь и тефлон 
Принцип измерения  Магнитный, индуктивный 
Температура окружающей среды  -25 ... 70 °C 
Выход переключателя  PNP 
Функция переключающего элемента  Нормально разомкнутый контакт 
Повторяемость порога переключения  +/- 0,1 mm 
Время включения  <= 5 ms 
Время выключения  <= 5 ms 
Макс. выходной ток  200 mA 
Макс. характеристика контакта DC  6 W 
Падение напряжения  2 V 
Остаточный ток  <= 0,01 mA 
Защита от короткого замыкания  Пульсирующий 
Способность выдерживать перегрузку  Имеется в наличии 
Диапазон рабочего напряжения DC  10 ... 30 V 
Защищен от смены полярности  для всех электрических соединений 
Электрическое подключение  Кабель 
3-жильный
Направление выхода  аксиальный 
Длина кабеля  2,5 m 
Атрибуты кабеля  Стандарт 
Информация о материале, оплетка кабеля  PVC 
Тип крепления  При помощи принадлежностей 
Макс. момент затяжки  0,8 Nm 
Вес продукта  70 g 
Материал корпуса  PET 
Рабочий режим дисплея  Желтый светодиод 
Температура окружающей среды  -5 ... 70 °C 
Класс защиты  IP67 
Производитель: Festo
Подробнее
Купить

Датчик положения SMTO-4U-PS-S-LED-24..

Бесконтактный датчик, PNP, 24VDC, разъем, без крепежа

Проект  Круглый 
Наличие сертификатов  C-Tick 
Обозначение CE (см. заявление о соответствии)  в соответствии с директивой EU по электромагнитной совместимости EMC 
Замечания по материалу  Не содержит медь и тефлон 
Принцип измерения  Магнитный, индуктивный 
Температура окружающей среды  -25 ... 70 °C 
Выход переключателя  PNP 
Функция переключающего элемента  Нормально разомкнутый контакт 
Повторяемость порога переключения  +/- 0,1 mm 
Время включения  0,5 ms 
Время выключения  0,5 ms 
Макс. выходной ток  200 mA 
Макс. характеристика контакта DC  6 W 
Падение напряжения  <= 2 V 
Остаточный ток  <= 0,01 mA 
Защита от короткого замыкания  Пульсирующий 
Способность выдерживать перегрузку  Имеется в наличии 
Диапазон рабочего напряжения DC  10 ... 30 V 
Защищен от смены полярности  для всех электрических соединений 
Электрическое подключение  Разъем 
M8x1
3-пин
Направление выхода  аксиальный 
Макс. момент затяжки разъема  0,3 Nm 
Тип крепления  При помощи принадлежностей 
Макс. момент затяжки  0,8 Nm 
Вес продукта  6 g 
Материал корпуса  PA 
PET
PUR
Рабочий режим дисплея  Желтый светодиод 
Класс защиты  IP67 
Производитель: Festo
Подробнее
Купить

Датчик положения SMTO-8E-NS-M12-LED-24..

Бесконтактный датчик, NPN, 24VDC, кабель 2,5 м, разъем М12, без крепежа

Проект  для Т-образной щели 
Наличие сертификатов  C-Tick 
Обозначение CE (см. заявление о соответствии)  в соответствии с директивой EU по электромагнитной совместимости EMC 
Замечания по материалу  Не содержит медь и тефлон 
Соответствует директиве по ограничению использования опасных веществ (RoHS)
Принцип измерения  магниторезистивный 
Температура окружающей среды  -20 ... 60 °C 
Выход переключателя  NPN 
Функция переключающего элемента  Нормально разомкнутый контакт 
Повторяемость порога переключения  +/- 0,1 mm 
Время включения  <= 0,5 ms 
Время выключения  10 ... 25 ms 
Макс. выходной ток  100 mA 
Макс. характеристика контакта DC  3 W 
Падение напряжения  <= 1,8 V 
Остаточный ток  <= 0,01 mA 
Защита от короткого замыкания  Пульсирующий 
Способность выдерживать перегрузку  Имеется в наличии 
Диапазон рабочего напряжения DC  10 ... 30 V 
Защищен от смены полярности  для всех электрических соединений 
Электрическое подключение  Разъем 
M12x1
3-пин
Направление выхода  Поперечный 
Макс. момент затяжки разъема  0,5 Nm 
Тип крепления  Фиксатор для Т-образной щели 
При помощи принадлежностей
Вставляется в паз сверху
Момент затяжки  0,5 Nm 
Вес продукта  10 g 
Материал корпуса  Алюминиевый сплав 
TPE-U(PU)
Легированная сталь, нержавеющая
Рабочий режим дисплея  Желтый светодиод 
Класс защиты  IP65 
IP67
Производитель: Festo
Подробнее
Купить

Датчик положения SMTO-8E-NS-S-LED-24..

Бесконтактный датчик, NPN, 24VDC, разъем, без крепежа

Проект  для Т-образной щели 
Наличие сертификатов  C-Tick 
Обозначение CE (см. заявление о соответствии)  в соответствии с директивой EU по электромагнитной совместимости EMC 
Замечания по материалу  Не содержит медь и тефлон 
Соответствует директиве по ограничению использования опасных веществ (RoHS)
Принцип измерения  магниторезистивный 
Температура окружающей среды  -20 ... 60 °C 
Выход переключателя  NPN 
Функция переключающего элемента  Нормально разомкнутый контакт 
Повторяемость порога переключения  +/- 0,1 mm 
Время включения  <= 0,5 ms 
Время выключения  10 ... 25 ms 
Макс. выходной ток  100 mA 
Макс. характеристика контакта DC  3 W 
Падение напряжения  <= 1,8 V 
Остаточный ток  <= 0,01 mA 
Защита от короткого замыкания  Пульсирующий 
Способность выдерживать перегрузку  Имеется в наличии 
Диапазон рабочего напряжения DC  10 ... 30 V 
Защищен от смены полярности  для всех электрических соединений 
Электрическое подключение  Разъем 
M8x1
3-пин
Направление выхода  Поперечный 
Макс. момент затяжки разъема  0,3 Nm 
Тип крепления  Фиксатор для Т-образной щели 
При помощи принадлежностей
Вставляется в паз сверху
Момент затяжки  1 Nm 
Вес продукта  10 g 
Материал корпуса  Латунь 
TPE-U(PU)
Никелирование
Рабочий режим дисплея  Желтый светодиод 
Класс защиты  IP65 
IP67
Производитель: Festo
Подробнее
Купить

Датчик положения SMTO-8E-PS-M12-LED-24..

Бесконтактный датчик, PNP, 24VDC, кабель 2,5 м, разъем М12, без крепежа

Проект для Т-образной щели 
Наличие сертификатов C-Tick 
Обозначение CE (см. заявление о соответствии) в соответствии с директивой EU по электромагнитной совместимости EMC 
Замечания по материалу Не содержит медь и тефлон 
Соответствует директиве по ограничению использования опасных веществ (RoHS)
Принцип измерения магниторезистивный 
Температура окружающей среды -20 ... 60 °C 
Выход переключателя PNP 
Функция переключающего элемента Нормально разомкнутый контакт 
Повторяемость порога переключения +/- 0,1 mm 
Время включения <= 0,5 ms 
Время выключения 10 ... 25 ms 
Макс. выходной ток 100 mA 
Макс. характеристика контакта DC 3 W 
Падение напряжения <= 1,8 V 
Остаточный ток <= 0,01 mA 
Защита от короткого замыкания Пульсирующий 
Способность выдерживать перегрузку Имеется в наличии 
Диапазон рабочего напряжения DC 10 ... 30 V 
Защищен от смены полярности для всех электрических соединений 
Электрическое подключение Разъем 
M12x1
3-пин
Направление выхода Поперечный 
Макс. момент затяжки разъема 0,5 Nm 
Тип крепления Фиксатор для Т-образной щели 
При помощи принадлежностей
Вставляется в паз сверху
Момент затяжки 0,5 Nm 
Вес продукта 10 g 
Материал корпуса Алюминиевый сплав 
TPE-U(PU)
Легированная сталь, нержавеющая
Рабочий режим дисплея Желтый светодиод 
Класс защиты IP65 
IP67
Производитель: Festo
Подробнее
Купить

Датчик положения SMTO-8E-PS-S-LED-24..

Бесконтактный датчик, PNP, 24VDC, разъем, без крепежа

Проект для Т-образной щели 
Наличие сертификатов C-Tick 
Обозначение CE (см. заявление о соответствии) в соответствии с директивой EU по электромагнитной совместимости EMC 
Замечания по материалу Не содержит медь и тефлон 
Соответствует директиве по ограничению использования опасных веществ (RoHS)
Принцип измерения магниторезистивный 
Температура окружающей среды -20 ... 60 °C 
Выход переключателя PNP 
Функция переключающего элемента Нормально разомкнутый контакт 
Повторяемость порога переключения +/- 0,1 mm 
Время включения <= 0,5 ms 
Время выключения 10 ... 25 ms 
Макс. выходной ток 100 mA 
Макс. характеристика контакта DC 3 W 
Падение напряжения <= 1,8 V 
Остаточный ток <= 0,01 mA 
Защита от короткого замыкания Пульсирующий 
Способность выдерживать перегрузку Имеется в наличии 
Диапазон рабочего напряжения DC 10 ... 30 V 
Защищен от смены полярности для всех электрических соединений 
Электрическое подключение Разъем 
M8x1
3-пин
Направление выхода Поперечный 
Макс. момент затяжки разъема 0,3 Nm 
Тип крепления Фиксатор для Т-образной щели 
При помощи принадлежностей
Вставляется в паз сверху
Момент затяжки 1 Nm 
Вес продукта 10 g 
Материал корпуса Латунь 
TPE-U(PU)
Никелирование
Рабочий режим дисплея Желтый светодиод 
Класс защиты IP65 
Производитель: Festo
Подробнее
Купить

Датчик положения SMTSO-1-PS-S-LED-24..

Бесконтактный датчик, PNP, 24VDC, разъем, без крепежа, для сварки

Проект Блочного проекта 
Наличие сертификатов C-Tick 
Обозначение CE (см. заявление о соответствии) в соответствии с директивой EU по электромагнитной совместимости EMC 
Замечания по материалу Не содержит медь и тефлон 
Принцип измерения Магнитный, индуктивный 
Температура окружающей среды -25 ... 70 °C 
Выход переключателя PNP 
Функция переключающего элемента Нормально разомкнутый контакт 
Повторяемость порога переключения +/- 0,1 mm 
Время включения 35 ms 
Время выключения 20 ms 
Макс. выходной ток 200 mA 
Макс. характеристика контакта DC 6 W 
Падение напряжения 3 V 
Остаточный ток 0,01 mA 
Защита от короткого замыкания Пульсирующий 
Способность выдерживать перегрузку Имеется в наличии 
Диапазон рабочего напряжения DC 10 ... 30 V 
Защищен от смены полярности для всех электрических соединений 
Электрическое подключение Разъем 
M12x1
3-пин
Направление выхода аксиальный 
Макс. момент затяжки разъема 0,3 Nm 
Тип крепления При помощи принадлежностей 
Момент затяжки < 0,3 Nm 
Вес продукта 70 g 
Материал корпуса PA 
PUR
Цинковая штамповка
Режим готовности дисплея Зеленый светодиод 
Рабочий режим дисплея Желтый светодиод 
Класс защиты IP67 
Стойкость к магнитным полям Магнитные поля переменного тока 
50 - 60 Hz
Производитель: Festo
Подробнее
Купить

Датчик положения SMTSO-8E-NS-M12-LED-24..

Бесконтактный датчик, NPN, 24VDC, разъем M12, без крепежа, для сварки

Проект для Т-образной щели 
Наличие сертификатов C-Tick 
Обозначение CE (см. заявление о соответствии) в соответствии с директивой EU по электромагнитной совместимости EMC 
Замечания по материалу Не содержит медь и тефлон 
Принцип измерения Магнитный, индуктивный 
Температура окружающей среды -25 ... 70 °C 
Выход переключателя NPN 
Функция переключающего элемента Нормально разомкнутый контакт 
Повторяемость порога переключения +/- 0,1 mm 
Время включения <= 38 ms 
Время выключения <= 20 ms 
Макс. выходной ток 200 mA 
Макс. характеристика контакта DC 6 W 
Падение напряжения <= 3 V 
Остаточный ток <= 0,01 mA 
Защита от короткого замыкания Пульсирующий 
Способность выдерживать перегрузку Имеется в наличии 
Диапазон рабочего напряжения DC 10 ... 30 V 
Защищен от смены полярности для всех электрических соединений 
Электрическое подключение Разъем 
M12x1
3-пин
Направление выхода Поперечный 
Тип крепления Фиксатор для Т-образной щели 
При помощи принадлежностей
Вставляется в паз сверху
Макс. момент затяжки 0,5 Nm 
Вес продукта 10 g 
Материал корпуса Алюминиевый сплав 
PA
PUR
Легированная сталь, нержавеющая
Рабочий режим дисплея Желтый светодиод 
Класс защиты IP65 
IP67
Стойкость к магнитным полям Магнитные поля переменного тока 
45 - 65 Hz
Производитель: Festo
Подробнее
Купить

Датчик положения SMTSO-8E-PS-M12-LED-24..

Бесконтактный датчик,PNP, 24VDC, разъем M12, без крепежа, для сварки

Проект для Т-образной щели 
Наличие сертификатов C-Tick 
Обозначение CE (см. заявление о соответствии) в соответствии с директивой EU по электромагнитной совместимости EMC 
Замечания по материалу Не содержит медь и тефлон 
Принцип измерения Магнитный, индуктивный 
Температура окружающей среды -25 ... 70 °C 
Выход переключателя PNP 
Функция переключающего элемента Нормально разомкнутый контакт 
Повторяемость порога переключения +/- 0,1 mm 
Время включения 38 ms 
Время выключения 20 ms 
Макс. выходной ток 200 mA 
Макс. характеристика контакта DC 6 W 
Падение напряжения <= 1,8 V 
Остаточный ток <= 0,01 mA 
Защита от короткого замыкания Да 
Способность выдерживать перегрузку Имеется в наличии 
Диапазон рабочего напряжения DC 10 ... 30 V 
Защищен от смены полярности для всех электрических соединений 
Электрическое подключение Разъем 
M12x1
3-пин
Направление выхода Поперечный 
Макс. момент затяжки разъема 0,5 Nm 
Тип крепления При помощи принадлежностей 
Вес продукта 19 g 
Материал корпуса Алюминиевый сплав 
PA
TPE-U(PU)
Легированная сталь, нержавеющая
Рабочий режим дисплея Желтый светодиод 
Класс защиты IP65 
IP67
Стойкость к магнитным полям Магнитные поля переменного тока 
45 - 65 Hz
Производитель: Festo
Подробнее
Купить

Датчик приближения CRSMEO-4-K-LED-24..

Датчик положения Festo, коррозионностойкий, с кабелем, без крепежного набора CRSMB/CRSMBR.

Проект Круглый
Авторизация RCM Mark
Обозначение CE (см. заявление о соответствии) в соответствии с директивой EU по электромагнитной совместимости EMC
Замечания по материалу Не содержит медь и тефлон
Принцип измерения Магнитный, геркон
Температура окружающей среды -20 ... 60 °C
Выход переключателя с контактом, биполярный
Функция переключающего элемента Нормально разомкнутый контакт
Повторяемость порога переключения +/- 0,1 mm
Время включения <= 0,5 ms
Время выключения 0,03 ms
Макс. выходной ток 500 mA
Макс. характеристика контакта DC 10 W
Защита от короткого замыкания Нет
Диапазон рабочего напряжения DC 12 ... 30 V
Защищен от смены полярности Нет
Электрическое подключение Кабель
3-жильный
Длина кабеля 2,5 m
Информация о материале, оплетка кабеля TPE-O
Тип крепления с принадлежностями
Вес продукта 70 g
Информация о материале, корпус PP
Рабочий режим дисплея Жёлтый светодиод
Температура окружающей среды -5 ... 60 °C
Класс защиты IP67

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-1000U-HQ10-2SA-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-10
Ambient temp0 - 50 °C
Analogue output4 - 20 mA
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value1000 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value1000 l/min
Flow measurement range initial value10 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. load resistance, current output500 Ohm
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value20 mA
Output characteristic curve initial value4 mA
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-1000U-HQ10-2SV-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-10
Ambient temp0 - 50 °C
Analogue output0 - 10 V
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value1000 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value1000 l/min
Flow measurement range initial value10 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Min. load resistance, voltage output10 kOhm
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value10 V
Output characteristic curve initial value0 V
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-1000U-HQ12-2SA-M12-EX2..

Датчик расхода

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-12
Ambient temp0 - 50 °C
Analogue output4 - 20 mA
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value1000 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value1000 l/min
Flow measurement range initial value10 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. load resistance, current output500 Ohm
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value20 mA
Output characteristic curve initial value4 mA
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-1000U-WQ10-2SA-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-10
Ambient temp0 - 50 °C
Analogue output4 - 20 mA
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value1000 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value1000 l/min
Flow measurement range initial value10 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. load resistance, current output500 Ohm
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value20 mA
Output characteristic curve initial value4 mA
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-1000U-WQ10-2SV-M12..

Датчик расхода

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-10
Ambient temp0 - 50 °C
Analogue output0 - 10 V
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value1000 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value1000 l/min
Flow measurement range initial value10 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Min. load resistance, voltage output10 kOhm
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value10 V
Output characteristic curve initial value0 V
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-10U-HQ6-2SA-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-6
Ambient temp0 - 50 °C
Analogue output4 - 20 mA
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value10 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value10 l/min
Flow measurement range initial value0.1 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. load resistance, current output500 Ohm
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Nominal temperature23 °C
Operating mediumAir quality class 3:4:1 to DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value20 mA
Output characteristic curve initial value4 mA
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/h
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-10U-HQ6-2SV-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-6
Ambient temp0 - 50 °C
Analogue output0 - 10 V
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value10 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value10 l/min
Flow measurement range initial value0.1 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Min. load resistance, voltage output10 kOhm
Nominal temperature23 °C
Operating mediumAir quality class 3:4:1 to DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value10 V
Output characteristic curve initial value0 V
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/h
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-10U-WQ6-2SA-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-6
Ambient temp0 - 50 °C
Analogue output4 - 20 mA
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value10 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value10 l/min
Flow measurement range initial value0.1 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. load resistance, current output500 Ohm
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Nominal temperature23 °C
Operating mediumAir quality class 3:4:1 to DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value20 mA
Output characteristic curve initial value4 mA
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/h
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-10U-WQ6-2SV-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-6
Ambient temp0 - 50 °C
Analogue output0 - 10 V
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value10 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value10 l/min
Flow measurement range initial value0.1 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Min. load resistance, voltage output10 kOhm
Nominal temperature23 °C
Operating mediumAir quality class 3:4:1 to DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value10 V
Output characteristic curve initial value0 V
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/h
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-200U-HQ10-2SA-M12..

Датчик расхода

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-10
Ambient temp0 - 50 °C
Analogue output4 - 20 mA
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value200 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value200 l/min
Flow measurement range initial value2 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. load resistance, current output500 Ohm
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value20 mA
Output characteristic curve initial value4 mA
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/h
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-200U-HQ10-2SV-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-10
Ambient temp0 - 50 °C
Analogue output0 - 10 V
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value200 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value200 l/min
Flow measurement range initial value2 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Min. load resistance, voltage output10 kOhm
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value10 V
Output characteristic curve initial value0 V
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/h
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-200U-HQ8-2SA-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-8
Ambient temp0 - 50 °C
Analogue output4 - 20 mA
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value200 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value200 l/min
Flow measurement range initial value2 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. load resistance, current output500 Ohm
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value20 mA
Output characteristic curve initial value4 mA
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/h
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-200U-HQ8-2SV-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-8
Ambient temp0 - 50 °C
Analogue output0 - 10 V
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value200 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value200 l/min
Flow measurement range initial value2 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Min. load resistance, voltage output10 kOhm
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value10 V
Output characteristic curve initial value0 V
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/h
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-200U-WQ10-2SA-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-10
Ambient temp0 - 50 °C
Analogue output4 - 20 mA
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value200 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value200 l/min
Flow measurement range initial value2 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. load resistance, current output500 Ohm
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value20 mA
Output characteristic curve initial value4 mA
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/h
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-200U-WQ10-2SV-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-10
Ambient temp0 - 50 °C
Analogue output0 - 10 V
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value200 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value200 l/min
Flow measurement range initial value2 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Min. load resistance, voltage output10 kOhm
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value10 V
Output characteristic curve initial value0 V
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/h
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-200U-WQ8-2SA-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-8
Ambient temp0 - 50 °C
Analogue output4 - 20 mA
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value200 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value200 l/min
Flow measurement range initial value2 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. load resistance, current output500 Ohm
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value20 mA
Output characteristic curve initial value4 mA
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/h
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-200U-WQ8-2SV-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-8
Ambient temp0 - 50 °C
Analogue output0 - 10 V
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value200 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value200 l/min
Flow measurement range initial value2 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Min. load resistance, voltage output10 kOhm
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value10 V
Output characteristic curve initial value0 V
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/h
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-50U-HQ6-2SA-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-6
Ambient temp0 - 50 °C
Analogue output4 - 20 mA
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value50 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value50 l/min
Flow measurement range initial value0.5 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. load resistance, current output500 Ohm
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Nominal temperature23 °C
Operating mediumAir quality class 3:4:1 to DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value20 mA
Output characteristic curve initial value4 mA
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/h
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-50U-HQ6-2SV-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-6
Ambient temp0 - 50 °C
Analogue output0 - 10 V
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value50 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value50 l/min
Flow measurement range initial value0.5 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Min. load resistance, voltage output10 kOhm
Nominal temperature23 °C
Operating mediumAir quality class 3:4:1 to DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value10 V
Output characteristic curve initial value0 V
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/h
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-50U-WQ6-2SA-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-6
Ambient temp0 - 50 °C
Analogue output4 - 20 mA
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value50 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value50 l/min
Flow measurement range initial value0.5 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. load resistance, current output500 Ohm
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Nominal temperature23 °C
Operating mediumAir quality class 3:4:1 to DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value20 mA
Output characteristic curve initial value4 mA
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/h
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-50U-WQ6-2SV-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-6
Ambient temp0 - 50 °C
Analogue output0 - 10 V
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value50 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value50 l/min
Flow measurement range initial value0.5 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Min. load resistance, voltage output10 kOhm
Nominal temperature23 °C
Operating mediumAir quality class 3:4:1 to DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value10 V
Output characteristic curve initial value0 V
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/h
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-600U-HQ10-2SA-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-10
Ambient temp0 - 50 °C
Analogue output4 - 20 mA
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value600 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value600 l/min
Flow measurement range initial value6 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. load resistance, current output500 Ohm
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value20 mA
Output characteristic curve initial value4 mA
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-600U-HQ10-2SV-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-10
Ambient temp0 - 50 °C
Analogue output0 - 10 V
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value600 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value600 l/min
Flow measurement range initial value6 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Min. load resistance, voltage output10 kOhm
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value10 V
Output characteristic curve initial value0 V
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-600U-WQ10-2SA-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-10
Ambient temp0 - 50 °C
Analogue output4 - 20 mA
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value600 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value600 l/min
Flow measurement range initial value6 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. load resistance, current output500 Ohm
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value20 mA
Output characteristic curve initial value4 mA
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfmф

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAB-600U-WQ10-2SV-M12..

Датчик расхода  

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAB
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingOptional
MountingWith through hole
MountingWith top-hat rail
MountingWith wall/surface fixing
Pneumatic connectionQS-10
Ambient temp0 - 50 °C
Analogue output0 - 10 V
Assembly positionAny
ATEX category DustII 3D
ATEX category GasII 3G
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive explosion protection (ATEX)
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value600 l/min
Characteristic curve for flow rate initial value0 l/min
Connector pin assignments per standardEN 60947-5-2
Corrosion resistance classification CRC2
Direction of flowP1 -> P2
Direction of flowUnidirectional
Explosion ignition protection type DustEx tD A22 IP54 T80°C
Explosion ignition protection type GasEx nA II T5 X
Explosion protectionZone 2 (ATEX)
Explosion protectionZone 22 (ATEX)
Explosion-proof ambient temperature0°C <= Ta <= +50°C
Flow measurement range final value600 l/min
Flow measurement range initial value6 l/min
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. output current<= 100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Min. load resistance, voltage output10 kOhm
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 10 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value10 V
Output characteristic curve initial value0 V
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2 x PNP or 2 x NPN switchable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionThreshold value comparator
Switching functionWindow comparator
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAM-62-1000L-M-2SA-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAM
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
Mountingon service unit
Pneumatic connectionManifold module
Ambient temp0 - 50 °C
Analogue output4 - 20 mA
Assembly positionHorizontal
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value1000 l/min
Characteristic curve for flow rate initial value0 l/min
Corrosion resistance classification CRC2
Direction of flowFrom left to right
Direction of flowUnidirectional
Flow measurement range final value1000 l/min
Flow measurement range initial value10 l/min
Materials information, housingAluminium die cast
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. load resistance, current output500 Ohm
Max. output current100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 16 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value20 mA
Output characteristic curve initial value4 mA
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure dependency margin in ± %FS/bar0.5 %FS/b.
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2x PNP or 2x NPN, adjustable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionWindow comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/Ktyp. 0.1%FS/K
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAM-62-1000L-M-2SV-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAM
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
Mountingon service unit
Pneumatic connectionManifold module
Ambient temp0 - 50 °C
Analogue output0 - 10 V
Assembly positionHorizontal
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value1000 l/min
Characteristic curve for flow rate initial value0 l/min
Corrosion resistance classification CRC2
Direction of flowFrom left to right
Direction of flowUnidirectional
Flow measurement range final value1000 l/min
Flow measurement range initial value10 l/min
Materials information, housingAluminium die cast
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. output current100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Min. load resistance, voltage output10 kOhm
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 16 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value10 V
Output characteristic curve initial value0 V
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure dependency margin in ± %FS/bar0.5 %FS/b.
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2x PNP or 2x NPN, adjustable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionWindow comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/Ktyp. 0.1%FS/K
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAM-62-1000L-TG12-2SA-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAM
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
Mountingon service unit
Pneumatic connectionG1/2
Ambient temp0 - 50 °C
Analogue output4 - 20 mA
Assembly positionHorizontal
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value1000 l/min
Characteristic curve for flow rate initial value0 l/min
Corrosion resistance classification CRC2
Direction of flowFrom left to right
Direction of flowUnidirectional
Flow measurement range final value1000 l/min
Flow measurement range initial value10 l/min
Materials information, housingAluminium die cast
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. load resistance, current output500 Ohm
Max. output current100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 16 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value20 mA
Output characteristic curve initial value4 mA
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure dependency margin in ± %FS/bar0.5 %FS/b.
Pressure drop< 100 mbar
Product weight1100 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2x PNP or 2x NPN, adjustable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionWindow comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/Ktyp. 0.1%FS/K
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAM-62-1000L-TG12-2SV-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAM
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingLine installation
Pneumatic connectionG1/2
Ambient temp0 - 50 °C
Analogue output0 - 10 V
Assembly positionHorizontal
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value1000 l/min
Characteristic curve for flow rate initial value0 l/min
Corrosion resistance classification CRC2
Direction of flowFrom left to right
Direction of flowUnidirectional
Flow measurement range final value1000 l/min
Flow measurement range initial value10 l/min
Materials information, housingAluminium die cast
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. output current100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Min. load resistance, voltage output10 kOhm
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 16 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value10 V
Output characteristic curve initial value0 V
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure dependency margin in ± %FS/bar0.5 %FS/b.
Pressure drop< 100 mbar
Product weight1100 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2x PNP or 2x NPN, adjustable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionWindow comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/Ktyp. 0.1%FS/K
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAM-62-3000L-M-2SA-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAM
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
Mountingon service unit
Pneumatic connectionManifold module
Ambient temp0 - 50 °C
Analogue output4 - 20 mA
Assembly positionHorizontal
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value3000 l/min
Characteristic curve for flow rate initial value0 l/min
Corrosion resistance classification CRC2
Direction of flowFrom left to right
Direction of flowUnidirectional
Flow measurement range final value3000 l/min
Flow measurement range initial value30 l/min
Materials information, housingAluminium die cast
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. load resistance, current output500 Ohm
Max. output current100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 16 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value20 mA
Output characteristic curve initial value4 mA
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure dependency margin in ± %FS/bar0.5 %FS/b.
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2x PNP or 2x NPN, adjustable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionWindow comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/Ktyp. 0.1%FS/K
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAM-62-3000L-TG12-2SA-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAM
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingLine installation
Pneumatic connectionG1/2
Ambient temp0 - 50 °C
Analogue output4 - 20 mA
Assembly positionHorizontal
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value3000 l/min
Characteristic curve for flow rate initial value0 l/min
Corrosion resistance classification CRC2
Direction of flowFrom left to right
Direction of flowUnidirectional
Flow measurement range final value3000 l/min
Flow measurement range initial value30 l/min
Materials information, housingAluminium die cast
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. load resistance, current output500 Ohm
Max. output current100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 16 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value20 mA
Output characteristic curve initial value4 mA
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure dependency margin in ± %FS/bar0.5 %FS/b.
Pressure drop< 100 mbar
Product weight1100 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2x PNP or 2x NPN, adjustable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionWindow comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/Ktyp. 0.1%FS/K
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAM-62-3000L-TG12-2SV-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAM
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingLine installation
Pneumatic connectionG1/2
Ambient temp0 - 50 °C
Analogue output0 - 10 V
Assembly positionHorizontal
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value5000 l/min
Characteristic curve for flow rate initial value0 l/min
Corrosion resistance classification CRC2
Direction of flowFrom left to right
Direction of flowUnidirectional
Flow measurement range final value3000 l/min
Flow measurement range initial value30 l/min
Materials information, housingAluminium die cast
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. output current100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Min. load resistance, voltage output10 kOhm
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 16 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value10 V
Output characteristic curve initial value0 V
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure dependency margin in ± %FS/bar0.5 %FS/b.
Pressure drop< 100 mbar
Product weight1100 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2x PNP or 2x NPN, adjustable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionWindow comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/Ktyp. 0.1%FS/K
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAM-62-5000L-M-2SA-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAM
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
Mountingon service unit
Pneumatic connectionManifold module
Ambient temp0 - 50 °C
Analogue output4 - 20 mA
Assembly positionHorizontal
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value5000 l/min
Characteristic curve for flow rate initial value0 l/min
Corrosion resistance classification CRC2
Direction of flowFrom left to right
Direction of flowUnidirectional
Flow measurement range final value5000 l/min
Flow measurement range initial value50 l/min
Materials information, housingAluminium die cast
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. load resistance, current output500 Ohm
Max. output current100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 16 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value20 mA
Output characteristic curve initial value4 mA
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure dependency margin in ± %FS/bar0.5 %FS/b.
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2x PNP or 2x NPN, adjustable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionWindow comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/Ktyp. 0.1%FS/K
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAM-62-5000L-M-2SV-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAM
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
Mountingon service unit
Pneumatic connectionManifold module
Ambient temp0 - 50 °C
Analogue output0 - 10 V
Assembly positionHorizontal
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value5000 l/min
Characteristic curve for flow rate initial value0 l/min
Corrosion resistance classification CRC2
Direction of flowFrom left to right
Direction of flowUnidirectional
Flow measurement range final value5000 l/min
Flow measurement range initial value50 l/min
Materials information, housingAluminium die cast
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. output current100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Min. load resistance, voltage output10 kOhm
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 16 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value10 V
Output characteristic curve initial value0 V
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure dependency margin in ± %FS/bar0.5 %FS/b.
Pressure drop< 100 mbar
Product weight600 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2x PNP or 2x NPN, adjustable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionWindow comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/Ktyp. 0.1%FS/K
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAM-62-5000L-TG12-2SA-M12..

Датчик расхода

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAM
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingLine installation
Pneumatic connectionG1/2
Ambient temp0 - 50 °C
Analogue output4 - 20 mA
Assembly positionHorizontal
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value5000 l/min
Characteristic curve for flow rate initial value0 l/min
Corrosion resistance classification CRC2
Direction of flowFrom left to right
Direction of flowUnidirectional
Flow measurement range final value5000 l/min
Flow measurement range initial value50 l/min
Materials information, housingAluminium die cast
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. load resistance, current output500 Ohm
Max. output current100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 16 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value20 mA
Output characteristic curve initial value4 mA
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure dependency margin in ± %FS/bar0.5 %FS/b.
Pressure drop< 100 mbar
Product weight1100 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2x PNP or 2x NPN, adjustable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionWindow comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/Ktyp. 0.1%FS/K
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFAM-62-5000L-TG12-2SV-M12..

Датчик расхода 

PropertyNo
Product TypeFesto Flow sensors
Short type codeSFAM
Electrical Connect5-pin
Electrical ConnectM12 x 1
Electrical ConnectPlug straight
MountingLine installation
Pneumatic connectionG1/2
Ambient temp0 - 50 °C
Analogue output0 - 10 V
Assembly positionHorizontal
Authorisationc UL us - Recognized (OL)
AuthorisationC-Tick
CE mark (see declaration of conformity)to EU directive for EMC
Characteristic curve for flow rate final value5000 l/min
Characteristic curve for flow rate initial value0 l/min
Corrosion resistance classification CRC2
Direction of flowFrom left to right
Direction of flowUnidirectional
Flow measurement range final value5000 l/min
Flow measurement range initial value50 l/min
Materials information, housingAluminium die cast
Materials information, housingPA-reinforced
Materials noteConforms to RoHS
Max. output current100 mA
Measured variableConsumption
Measured variableFlow rate
Measuring principleThermal
Medium temperature0 - 50 °C
Min. load resistance, voltage output10 kOhm
Nominal temperature23 °C
Operating mediumAir quality class 5:4:3 as per DIN ISO 8573-1
Operating mediumNitrogen
Operating Pressure0 - 16 bar
Operating voltage range DC15 - 30 V
Output characteristic curve final value10 V
Output characteristic curve initial value0 V
Polarity protectedfor all electrical connections
Precision margin in ± %FS3 %FS
Precision zero point in ± %FS0.3 %FS
Pressure dependency margin in ± %FS/bar0.5 %FS/b.
Pressure drop< 100 mbar
Product weight1100 g
Protection classIP65
Repetition accuracy margin in ± %FS0.8 %FS
Repetition accuracy zero point in ± %FS0.2 %FS
Short circuit strengthYes
Switch output2x PNP or 2x NPN, adjustable
Switching element functionNormally closed contact
Switching element functionNormally open contact
Switching functionWindow comparator or threshold value comparator, adjustable
Temperature co-efficient margin in ± %FS/Ktyp. 0.1%FS/K
Type of displayIlluminated LCD blue
Unit(s) that can be displayedl
Unit(s) that can be displayedl/min
Unit(s) that can be displayedm3
Unit(s) that can be displayedscf
Unit(s) that can be displayedscfm

 

Производитель: Festo
Подробнее
Купить

Датчик расхода SFE3-F005-L-WQ6-2NB-K1..

Датчик расхода

Производитель: Festo
Подробнее
Купить

Датчик расхода SFE3-F005-L-WQ6-2PB-K1..

Датчик расхода

Производитель: Festo
Подробнее
Купить

Датчик расхода SFE3-F010-L-WQ6-2NB-K1..

Датчик расхода

Производитель: Festo
Подробнее
Купить

Датчик расхода SFE3-F010-L-WQ6-2PB-K1..

Датчик расхода

Производитель: Festo
Подробнее
Купить